The cylinder and the regulator are the major components of an open set circuit scuba. So you only need to be aligned to sub for beginners and a skillful mastery of the relevant characteristics of their use and maintenance. The cylinder reservoir and regulator that seems so complicated pieces of diving equipment, where the lack of know-how to disaster could, especially in case of malfunction diving equipment a few hundred meters below the sea water andDiver has no way to say, how to handle the disaster because of lack of training and experience.
The article provides a useful overview of the literature on basic components and use of relevant open-circuit scuba September
The Scuba Tank
Even as cylinder tank, cylinder contributes mainly to pull, each diver must cope with the execution of multi-level dives. Yet it is perhaps the most important pieceEquipment for diving into consideration the fact that his cold-forged steel or aluminum extruded body storage space for high pressure compressed air or nitrox mixes. Note that the use nitrox requires extensive training and certification, if a breathing gas mixture is concentrated up to 40% oxygen, preferably atmospheric gases.
Most tanks are designed for pressure levels up to 3000 or 4500 per square inch (psi), optimize the diver would be able to support hisBreathing requirements during the detection limits of time zero and in his rise to the surface.
Divers are invited to bring a second cylindrical tank when diving in cold water environments with low visibility profile. In addition, divers regularly monitoring the concentration of gas in their tank by the pressure gauge and a trip to the mountains with a minimum of 500 psi left in their tank.
The Scuba Regulator
Based on the pressure regulator, adjust the sliderprovides breathing air to the diver from the pressure of the gases escaping through the reservoir; psi at levels that are harmful to the divers when they are inhaled directly.
The set consists of three primary sub-mechanisms, ie the first stage, second stage (primary) valve and the octopus or alternate air source together. The first phase of the drops directly to the tank cylinder, the pressure at intermediate levels and transports it into the second phase, in whichImplemented between the pressure to ambient pressure and provides the diver with an adjustable nozzle. Meanwhile, the octopus, functioning as a primary secondary valve, the diver can use again in the case of the second stage gas-free or share with a friend during an emergency.
Proper maintenance of the regulator must be set before and after the dive, prolong its useful life and their free components from contaminants flowing freely and causing flooding that could be spentvital part of scuba diving equipment [http://www.scubasuppliers.com] during the dive.
0 comments:
Post a Comment